| 課程名稱 |
天(時) |
費用 |
台北(平日班) |
台中(平日班)
台中(塑發假日班) |
| ATP課程 (原廠授權認證) |
Introduction to Pro/ENGINEER Wildfire 4.0
Pro/ENGINEER Wildfire 4.0快速上線 |
5(40) |
$25,000 |
*10/7.8.13.14.15
*11/4.5.10.11.12
台北(假日班) |
*8/26.27.28.9/2.3
*10/7.8.13.14.15
*12/2.3.8.9.10
*8/15.22.29.30.9/5.12.19.20.26
(政府補助班 請洽塑發 04-2359-5900#405鍾小姐) |
Pro/E Wildfire 4.0 Update from Pro/E Wildfire 2.0
從Pro/E WF2.0更新至Pro/E WF4.0 (From 2.0) |
2(16) |
$10,000 |
*9/10.11
*12/10.11 |
*11/12.13 |
Surface Modeling with Pro/ENGINEER Wildfire 4.0
Pro/ENGINEER Wildfire 4.0 曲面建模 (曲面一) |
3(24) |
$15,000 |
*9/15.16.17
*12/15.16.17 |
*9/8.9.10
*11/17.18.19 |
Freeform Surface Modeling using Pro/E Wildfire 4.0
利用Pro/ENGINEER 4.0設計自由曲面
(ISDX) (曲面二) |
2(16) |
$10,000 |
*9/24.25
*12/23.24 |
*11/25.26 |
Drawing Training with Wildfire 4.0
Pro/ENGINEER Wildfire 工程圖訓練 |
3(24) |
$15,000 |
*11/17.18.19 |
*9/15.16.17
*12/15.16.17 |
| Pro/ENGINEER Wildfire 鈑金設計訓練 |
2(16) |
$10,000 |
*10/21.22 |
*9/22.23
|
Advanced Assembly with Wildfire 4.0
Pro/ENGINEER Wildfire 進階組件訓練 |
3(24) |
$15,000 |
*8/18.19.20
*10/27.28.29 |
*10/20.21.22 |
Mold Design using Pro/ENGINEER Wildfire 3.0
Pro/Moldesign 模具設計模組課程 |
2(16) |
$10,000 |
*8/27.28
*11/25.26 |
*8/17.19
|
| 其他進階課程 |
Pro/MECHANICA Structure Training
Pro/MECHANICA 結構分析訓練 |
2(16) |
$10,000 |
*依客戶需求安排 |
*依客戶需求安排 |
| HOW & Workshop |
| Hands on Pro/E Wildfire 5.0 新功能 |
0.5(3) |
Free |
*9/18
*10/23 *12/4 |
*9/25
*10/9 |
| Hands on Pro/E 快速上手 Wildfire 4.0 |
1(7) |
Free |
*8/21 *9/4 *9/18
*10/9 *11/6 *12/18 |
*8/21
*11/20 |
| Workshop (Service) --- MathCAD |
0.5(3) |
Free |
-- |
-- |
| Workshop (Service) --- Isodraw |
0.5(3) |
Free |
-- |
-- |
